LP-70 with LS-1 Z 100-400 f/ 4.5-5.6 VR S lens
In stock
SKU
LS-1 LP-70 COMBO-1
$190.00
LP-70 with LS-1 Z 100-400 f/ 4.5-5.6 VR S lens is available to buy in increments of 1
Lens Support Bracket Nikon Z 70-200mm f/2.8 VR S and Z 100-400 f4.5-5.6 VR S lens LS-1 and LP-70
KES LP-70 Replacement Foot with LS-1 Support
LP-70
KES quick release replacement lens foot for Nikon Z 70-200mm f/2.8 VR S and Z 100-400mm f/4.5-5.6 VR S lens
FEATURES/SPECIFICATIONS
- Weight: 3.500 ounces
- Length: 4.280 inches
- Height: 1.225 inches
- Width including locking knob: 2.215 inches
- Dovetail design: Double
- Finish: Black and Satin Silver anodize
- Material: 6061-T6 aluminum
- Additional mounting holes: (1) 1/4-20, (1) 3/8-16
- QD System: Yes, Material: Stainless Steel (Industry Standard Quick Disconnect System) Click here to learn about the QD system
- Safety Stops: Yes
- Knob: Captive design
- Can lens hood be reversed for storage with replacement foot mounted: Yes
LS-1 SPECIFICATIONS
The KES quick release lens support for Nikon Z 70-200mm f/2.8 VR S lens used in conjunction with the LP-70 replacement foot. By using the LS-1 lens support, the shift up and down is totally reduced when loosening the lens collar to rotate the lens and stabilizes the front of the lens.
- Weight: 2.6 ounces
- Bearing/Bolt: Stainless
- Knobs: Aluminum and captive
- Finish: Black and Satin Silver anodize
- Material: 6061-T6 aluminum
QUESTIONS and ANSWERS
Q. I have had my lens for awhile but now my LP-70 wiggles or seems loose on the lens. Why would this happen?
A. Please check the 4 screws on the plate where the lens foot attaches to the lens. These have been known to come loose or are loose direct from the factory on a brand new lens. If they are loose, please tighten with the correct size screwdriver to prevent stripping of the screw heads.
| Part Number | LS-1 LP-70 COMBO |
|---|---|
| Keywords | Lens Support Bracket Nikon Z 70-200mm f/2.8 VR S, Z 100-400 f/ 4.5-5.6 VR S lens LS-1 and LP-70,COMBO,lp-70,lp70, nikon 100-400, 100-400 |